Morton40 22 Posted March 16, 2016 Report Share Posted March 16, 2016 My friend's ex hubby worked there in the 60's and 70;s before leaving to join the Police Force, he was called Paul Scrivens, you may know him............. I was there from 69 to 76 when I emigrated to Australia Quote Link to post Share on other sites
Oztalgian 3,218 Posted March 16, 2016 Report Share Posted March 16, 2016 Reading through PeverilPeril's posts brought back many memories of my time as an apprentice toolmaker, along with names of long forgotten machine tools. It must be forty years since I heard the term Jarvo or being sent to the stores for a "long wait" I have recollections of one time on night shift when the owner of the factory called in on his way home from some do and one bloke had the motor out of his Zephyr on the Newall jig borers being rebored, the cylinder head and crankshaft on the Jones and Shipman surface and cylindrical grinders respectively. Just a quiet look was all that was needed. I never worked at the ROF but did spend some time at COD Chilwell and the ingenuity of some of the blokes when nicking stuff was amazing. I often wonder why the military plods only asked people to open the boot of their cars as the number of cars with multiple batteries, starter motors and dynamo's in the engine bays was common knowledge? Quote Link to post Share on other sites
Michael Booth 7,364 Posted March 16, 2016 Report Share Posted March 16, 2016 Welcome to Nottstalgia, Morton40. I look forward to reading your posts and sharing your memories. Quote Link to post Share on other sites
LizzieM 9,497 Posted March 16, 2016 Report Share Posted March 16, 2016 # 51, Morton That was most likely Baz Holmes, a very good friend of my Dad, who also worked at the ROF from 1938 til 1986, apart from the War years. Welcome to Nottstalgia! Quote Link to post Share on other sites
Morton40 22 Posted March 23, 2016 Report Share Posted March 23, 2016 Couple of mates of mine worked there in the 70s Bessie Moore & Gren Turner. I got to know more about the place in the late 80s when they moved the pattern room and proof house there. We were making custom pistols at the time and used the proof house regularly. Bess Moore was he a stocky guy from over carlton hill , I cant remember the name of the suburb ? ( netherfield maybe ) if so we had a few drink together Quote Link to post Share on other sites
Cliff Ton 10,435 Posted March 23, 2016 Report Share Posted March 23, 2016 Britain from Above 1936 - Ordnance Factory being built. 1 Quote Link to post Share on other sites
LizzieM 9,497 Posted April 24, 2018 Report Share Posted April 24, 2018 The day in 1986 when my dad retired from ROF after being there for 48 years, apart from 4 years in RAF during WW2. He was still using that ‘long service’ watch when he passed away 5 years ago. 4 Quote Link to post Share on other sites
Jill Sparrow 10,267 Posted April 24, 2018 Report Share Posted April 24, 2018 My grandad, Ted Sparrow worked at ROF during WW2. He'd done his bit in the Royal Artillery during WW1 and was 48 in 1939. Exactly what he did at ROF I'm not sure but he was in charge of shipments of military equipment and on occasions when he was needed urgently, probably because some supply ship had been sunk, a car would arrive outside 12 Chapel Street in Beeston in the middle of the night to transport him to the ROF. This made him feel very important! He also fancied his chance with the ATS girls. Grandma Kate soon put him right about that! Ted was supplied with all his meals at ROF, plus a cigarette allowance. No wonder be virtually lived there. 2 1 Quote Link to post Share on other sites
Moody 0 Posted April 16, 2019 Report Share Posted April 16, 2019 My dad did his apprenticeship at the factory . Not sure when he was born 1922. Can I obtain any information to find out. Quote Link to post Share on other sites
LizzieM 9,497 Posted April 16, 2019 Report Share Posted April 16, 2019 He was probably doing his apprenticeship the same time as my Dad who was born December 1921. My Dad finished his apprenticeship in December 1942 and joined the RAF and then went back to ROF after the war, spending the rest of his working life in the factory, and hating every minute of it 1 Quote Link to post Share on other sites
Cliff Ton 10,435 Posted April 16, 2019 Report Share Posted April 16, 2019 2 hours ago, Moody said: My dad did his apprenticeship at the factory . Not sure when he was born 1922. Can I obtain any information to find out. What exactly do you want to find out ? When he was born ? or what he did at the factory ? or something else ? Quote Link to post Share on other sites
Jill Sparrow 10,267 Posted April 16, 2019 Report Share Posted April 16, 2019 My paternal grandfather, Ted Sparrow, worked at the ROF during WW2. He'd done his fighting in WW1 and rather enjoyed fraternising with the ATS girls at Chilwell, much to his wife's disgust. Precisely what he did there I'm not sure but it was not infrequently that a car would draw up at his house in the middle of the night to take him back to the ROF. He thought that rather grand. It made him feel important. It also woke up my grandmother, the irascible Kate, which was only a good idea if you were tired of living! Kate had worked at Chilwell during WW1 and was playing hookey on the night of the explosion! She had sloped off to meet Ted, who was home on leave so, in a sense he saved her life. He just didn't realise that she would spend the rest of it making his a misery! They went to The Palace cinema in Beeston where part way through the film, most of the ceiling fell in! 1 Quote Link to post Share on other sites
Moody 0 Posted April 18, 2019 Report Share Posted April 18, 2019 On 4/16/2019 at 4:39 PM, Moody said: My dad did his apprenticeship at the factory . Not sure when he was born 1922. Can I obtain any information to find out. Want to find out what he did there and from when. If there is any record of this. My dad went on to work at spray & Burgess. Courtaulds. He was an engineer's fitter. Quote Link to post Share on other sites
Christopher hankin 0 Posted September 25, 2019 Report Share Posted September 25, 2019 Hi I did my apprenticeship at the ROF from 1974 to 1978 great times really I think the foreman in the training shop was Freddy Logan Quote Link to post Share on other sites
Bigred 0 Posted June 15, 2020 Report Share Posted June 15, 2020 Fred Logan , now theres a name from my era , i was apprentice there from 1970 to 74. My old man knew fred logan and got me an interveiw which ended with me being offered the job . Logan was a nasty vindictive little runt who took great delight in throwing things you made against the wall if they were not quite right even a small scratch on the finish , he used to shout scrap it! alot wonder if it was the same bloke mentioned earlier .Remember fred Street , Joe morrel and ernie wragg . Even remember Paul Scrivens cannot say i liked him though a bit of a bully as i remember Quote Link to post Share on other sites
Bigred 0 Posted June 15, 2020 Report Share Posted June 15, 2020 Does anyone nkow what happed to the barrel mounted outside the north shop , cannot find out any info , what was the bore where it came from or any photos of it . its a mystery !!! Also want to know the name of the apprentice manager in overall charge of all apprentices on site , all i can remember of him is that he was a nice bloke but looked a bit like a 1950's spive ! Quote Link to post Share on other sites
Webb 0 Posted May 30, 2021 Report Share Posted May 30, 2021 My paternal grandfather was Frederick William Webb who appears on the 1939 UK register as a Large Gun Borer living in Nottingham. Quote Link to post Share on other sites
Bigred 0 Posted June 14, 2021 Report Share Posted June 14, 2021 On 12/18/2014 at 9:54 PM, NewBasfordlad said: Couple of mates of mine worked there in the 70s Bessie Moore & Gren Turner. I got to know more about the place in the late 80s when they moved the pattern room and proof house there. We were making custom pistols at the time and used the proof house regularly. i joined ROF apprenticed in 1970 , i knew both Bess and Gren for many years Quote Link to post Share on other sites
Guido 5 Posted June 26, 2022 Report Share Posted June 26, 2022 Just came across this conversation looking for some other information. Started my apprenticeship ithere n 1969. Ahh the joys of walking through the Meadows along Kirk White Street down to Kings Meadow Road in a morning. The Staff in the first year apprentice training centre then were:- Fred Logan, Ernie Wragg, Baz Holmes and Alan Williams. I seem to remember some moved on to other sections in 1970. I think it was Ernie to Quality Control and Baz to Maintenance section (EDM?). Think Alan and Fred stayed on with a couple of new replacements. The TTO Technical Training Officer at the time was Dennis Mills and later there was an Apprentice Supervisor called Jack Fenton (MBE) joined by a Gordon Holmes as well. Stayed at Nottingham until they closed it down in 2001 after the various reorganisations took place, then transferred to the Leicester site. Guido Bontemps 3 1 Quote Link to post Share on other sites
Cliff Ton 10,435 Posted June 26, 2022 Report Share Posted June 26, 2022 This video from the 1980s contains footage of the Ordnance Factory. It starts on Clifton Bridge, goes along Queens Drive past the ROF, down Wilford Road, and past Broad Marsh Centre. Quote Link to post Share on other sites
LizzieM 9,497 Posted June 26, 2022 Report Share Posted June 26, 2022 @Guido as I have posted previously, my Dad, Geoff Moss, was a good friend of Baz Holmes, in and out of the workplace. Quote Link to post Share on other sites
Alpha 176 Posted June 27, 2022 Report Share Posted June 27, 2022 The memories and reminiscences of older Nottingham and similar topics and characters like the ROF, I find is what NS is really about. 1 Quote Link to post Share on other sites
Guido 5 Posted June 28, 2022 Report Share Posted June 28, 2022 On 6/15/2020 at 3:05 AM, Bigred said: Does anyone nkow what happed to the barrel mounted outside the north shop , cannot find out any info , what was the bore where it came from or any photos of it . its a mystery !!! Also want to know the name of the apprentice manager in overall charge of all apprentices on site , all i can remember of him is that he was a nice bloke but looked a bit like a 1950's spive ! There were two guns. One was a 14inch naval gun which was transferred to the Imperial War Museum site Fort Nelson on the South Coast. The other was an experimental 183mm gun intended for use as a tank Destroyer. This was moved to RO Glascoed, Usk, South Wales. The manager was possibly Dennis Mills. 1 Quote Link to post Share on other sites
PeverilPeril 3,268 Posted June 28, 2022 Report Share Posted June 28, 2022 In my younger years, in response to "where do you work"? it was usually - Gun Factreh, Raleh or dahn pit. 1 Quote Link to post Share on other sites
David sheridan 159 Posted June 28, 2022 Report Share Posted June 28, 2022 Funny to see a guy dahn pit riding a raleh bike shooting a gun ! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.