philmayfield 6,240 Posted September 25, 2018 Report Share Posted September 25, 2018 I presume access to the site will be up for renewal at sometime. Who funds it and what is the cost? Quote Link to post Share on other sites
radfordred 6,284 Posted September 25, 2018 Report Share Posted September 25, 2018 I believe it's November, our bossman made a rare appearance today? Must have deep pockets?   Posted February 1, 2015 Its not a matter of cost its a matter of Database size, repeat posting of images is not such a problem. Its quoting massive posts and just adding a short or one word reply! We are not like any other forum. we want to keep the oldest posts online for future readers. New members can be excused for so long. I dont see why mods like Cliff should spend their time editing posts to take out unnecessary quotes. PUSH THE DELETE BUTTON. Delete the whole post. We can also remove reputation points! The last resort can be member put in Moderation status. Your post may (or may not) appear only if a moderator gets time? Its a rule here, dont like it? Dont Post.  Quote Link to post Share on other sites
plantfit 7,673 Posted September 25, 2018 Report Share Posted September 25, 2018 1 hour ago, siddha said: If you wanted a starter ring where would you go?  1 hour ago, philmayfield said: Carbine, .22 or .177 Rog?  Lister in the west midlands carry all the parts, the dynostart is a good idea,I have just got back from the farm after looking at the engine, not sure where I could fit either but will checkout the web sites,thanks for the suggestion sidda.  Phil, .22 pre charged pneumatic,BSA R10 Mk 2, 10 shot magazine,bolt action, about 200 shots per fully charged bottle, I also have a 3 lts bottle for charging the onboard one, charged to 240 bar,quite a lot of pressure considering 1 bar is equal to 15 psi   Rog Quote Link to post Share on other sites
philmayfield 6,240 Posted September 25, 2018 Report Share Posted September 25, 2018 I've got a large yellow diver's bottle for charging my Rapid 7. It must be full of air because I can hardly lift it! On looking I've just noticed it was due for retesting in 2011. I don't seem to do much shooting now though. The Theoban looks very similar to yours with a scope and silencer. I've also got a laser sight. I do have an electronic chrono. to make sure I stay legal. 1 Quote Link to post Share on other sites
plantfit 7,673 Posted September 25, 2018 Report Share Posted September 25, 2018 I know the Theoben rapid 7 quite well, not made any more unfortunately, my brother in law had one for many years,I think the earlier version could be adjusted to increase their power output, the Theoben Fenman (springer) was a favourite with gamekeepers at one time,don't know whether it still is (NBL would know), my R10 is regulated so every shot has the same power, mine also came with BSA lifetime free servicing so well worth the money considering what gunsmiths charge these days  Rog Quote Link to post Share on other sites
philmayfield 6,240 Posted September 25, 2018 Report Share Posted September 25, 2018 Yes the output on this can be adjusted with an Allen screw at the rear. I had to adjust it with the chrono some years ago when I overhauled it and fitted new seals. The screw is now blanked off so there is no temptation to make it into a FAC weapon. I run at at around 11 foot pounds to be safe. Just out of interest I have an old BSA .22. It must be 60 years old. I’ll give a clean and a lubrication and see what that’s putting out. Not dieselling after oiling of course. Quote Link to post Share on other sites
radfordred 6,284 Posted September 25, 2018 Report Share Posted September 25, 2018 Horizontal most of the day looking at this, if your not up to owt in the early hours of Monday morning I land at ten past summit pick us up east mids    1 1 Quote Link to post Share on other sites
philmayfield 6,240 Posted September 25, 2018 Report Share Posted September 25, 2018 Well the old BSA is in fact a Webley Mk3 shooting at 9.5 ft. lbs and the Theoban is 11.5. Whether or not I can replace the spring on the Webley I don't know. I've just discovered it can be worth up to £400 so it might be worth a refurbishment! 1 Quote Link to post Share on other sites
philmayfield 6,240 Posted September 25, 2018 Report Share Posted September 25, 2018 Just checked what the muzzle velocity of the Mk3 should be and its 8/9 ft. lbs. so it's in peak condition! 1 Quote Link to post Share on other sites
plantfit 7,673 Posted September 25, 2018 Report Share Posted September 25, 2018 I restored a BSA Cadet Major some time ago, new main spring,new seals etc. rubbed the stock down to a lovely oil finish, sold it for very little £70.00 collectors want them as if they've never been touched,pristine condition, get some pellets for it and use it  Rog Quote Link to post Share on other sites
philmayfield 6,240 Posted September 25, 2018 Report Share Posted September 25, 2018 I've got Field Target Trophy pellets. The lever seems much harder to pull down. Must be me getting older. I think I'll stick to the ease of the Rapid 7! Might be worth rubbing the stock down to a mirror finish - but where do you stop? 1 Quote Link to post Share on other sites
plantfit 7,673 Posted September 25, 2018 Report Share Posted September 25, 2018 If it's a beech stock just lightly rub it down with some fine wire wool and then wipe it with a bit of stock oil, I was told once that "walnut oil" from Asda is best, that was after I spent a fair bit of money on Parker Hale walnut stock oil,three times the price  Rog Quote Link to post Share on other sites
plantfit 7,673 Posted September 25, 2018 Report Share Posted September 25, 2018 Ah, Shaw Taylor, did I read somewhere he was a body builder in his younger days, Â Rog 1 Quote Link to post Share on other sites
mary1947 2,099 Posted September 27, 2018 Report Share Posted September 27, 2018 sorry member's but this is how's your yesterday. Went to john my cousin's cremation Wednesday it was at Gedling Crematorium now I don't know if your like me, but I had never heard of a Crematorium at Gedling, so put post code into "flossy" and found it just a short ride from Traveller's Rest(pub) This Crematorium put Wilford Hill's to shame. It was built one and a half years ago, now I know Wilford Hills is old but last time I went to a cremation there the heating was not working and they could not get the gates to close, maybe the council will spend a little money on W/H, and update it. Any way back to my cousin, as you walked in there was a song coming from the CD then there was a story all about his life, next a bit of classical , followed by the Lords Prayer next because he had been in the Sherwood Forester's they had a old comrade playing The Last Post. The we had Mario Lanzor (not sure of spelling) It made a change from a Religious Cremation , it was a pleasant day to say goodbye but if it was non Religious why was the Lord's Prayer said? Don't take this the wrong way as it must have taken quite a while for the family to sort out the Cremation, as you only have half an hour to say goodbye to your loved one.   1 Quote Link to post Share on other sites
Jill Sparrow 10,386 Posted September 27, 2018 Report Share Posted September 27, 2018 Mary, my auntie who is 89, was telling me about the new crem. She said it was on either Catfoot or Spring Lane in Lambley....can't remember which. That is where she has decided to have her funeral when needed. Quote Link to post Share on other sites
philmayfield 6,240 Posted September 27, 2018 Report Share Posted September 27, 2018 It’s Catfoot Lane. I’m a regular there. Like it a lot. Straight to crem for me with no service so personally I’m not overbothered! Quote Link to post Share on other sites
jonab 1,644 Posted September 27, 2018 Report Share Posted September 27, 2018 The Canadians are still here. We all dined in Cannes yesterday at my friend's seafood restaurant. They want to go to a real Provençal restaurant for lunch so we're going to a little place in Mougins where Picasso used to live and eat. The restaurant is little known to outsiders and it is said that Picasso never paid for his food there, he just did a drawing or sketch instead.  Tonight I'm taking them to Restaurant Alain Llorca in Colle-sur-Loup just outside St Paul de Vence - in my view the best restaurant in the region - and it's Provençal cuisine.  I hired a 7 seat SUV to fit us all in during their visit and whilst I'm by no means a petrolhead, I'm very impressed with it. It's roomy and my wheelchair fits in very easily. Seriously thinking about getting one 1 1 Quote Link to post Share on other sites
plantfit 7,673 Posted September 27, 2018 Report Share Posted September 27, 2018 Up bright and early as usual,trike ride around local lanes,about 8 miles in all, called in at the doctors for my monthly prescription tablets so it looks like the doctor has given me another month in this world, lol, had a coffee when I got back home then dicided to trim the Acer tree in the front garden,the leaves are turning different colours now so it's brightened the front up a bit which is nice,,raked all the leaves up off the back garden, there a great big tree in the corner of the field and it delights in shedding it's leaves on my garden, bought three big lemons from Greens the village shop ready for my Sunday baking binge, might make a sponge cake as well as the lemon and wiskey drizzle cake, for the Macmillan sale in the village hall,time now for another coffee then get stuck in making a few more spokes for the penny farthing cycle, nip round the bungalow with the vacuum cleaner then sit down for half an hour before Mrs P gets back from the gym (or is it Jims?) Have a great day everyone  Rog Quote Link to post Share on other sites
Willow wilson 898 Posted September 27, 2018 Report Share Posted September 27, 2018 Earlier this week an Extraordinary meeting of the WW Household Domestic Effects, Chattels and Maintenance committee was convened. Item on the agenda; a new house number plaque. Investigations were made using junk mail brochures and on-line sales sites. Mrs WW saw and suggested buying an on-line one at £30. Mr WW insisted that he could make one from items stored in the 'might-need-this-one-day' reserve. It was explained by Mr WW that a suitable wooden background could easily be made with chamfered edges and corners, sanded smooth, suitably stained and varnished and brass numbers attached, all of which were already available at no cost. This was overridden by Mrs WW, who has the authority of two votes. Meeting was adjourned while a £30 plaque was ordered from an on-line site. Report back when affixed to house. The convening of this meeting was in no way influenced by the fact that two neighbours had recently installed new number plaques.  5 3 Quote Link to post Share on other sites
plantfit 7,673 Posted September 27, 2018 Report Share Posted September 27, 2018 I'm with you all the way on this WW, here's my attempt at customising a house name plate, as you can see it's been relegated to the shed   Rog 1 Quote Link to post Share on other sites
DJ360 6,751 Posted September 27, 2018 Report Share Posted September 27, 2018 I do recall some 'wag' on the Telly explaining that his house name.. 'COBWEBS' was actually an acronym for 'Currently Owned By Woolwich Equitable Building Society'. 1 Quote Link to post Share on other sites
DJ360 6,751 Posted September 27, 2018 Report Share Posted September 27, 2018 Sunny and warm outside. Probably the last such day until next year.. so I am 'sacking off' the D.I Y for the day and going ray catching instead.  1 Quote Link to post Share on other sites
plantfit 7,673 Posted September 27, 2018 Report Share Posted September 27, 2018 38 minutes ago, DJ360 said: 'Currently Owned By Woolwich Equitable Building Society'.  And mine is owned by me  Rog 2 Quote Link to post Share on other sites
DJ360 6,751 Posted September 27, 2018 Report Share Posted September 27, 2018 1 hour ago, plantfit said:  And mine is owned by me  Rog  As is mine.. by me. :) 1 Quote Link to post Share on other sites
plantfit 7,673 Posted September 27, 2018 Report Share Posted September 27, 2018 It's a nice feeling Col  Rog 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.